g200 piazza info

Talk about anything and everything
Post Reply
User avatar
Bradlze
Member
Member
Posts: 140
Joined: Mon Aug 29, 2005 6:10 pm

g200 piazza info

Post by Bradlze » Tue Feb 13, 2007 4:28 pm

hey guys where abouts does the power steering hang off the engine in a g200 piazza?
and anybody got wiring diagrams etc etc?

User avatar
wedgenut
Site Admin
Site Admin
Posts: 1636
Joined: Mon Jul 04, 2005 9:39 pm
Location: Hibiscus Coast NZ

Post by wedgenut » Tue Feb 13, 2007 5:53 pm

It dangles down on the left front under the alternator, bastard to get on and off but ah well it is a piazza after all. Got a fair bit of G200z info, diagrams etc. but it isn't too much different from the turbo apart from the obvious things. Most of the chassis wiring is the same, what do you need to know.
So many cars, so little cash

User avatar
Bradlze
Member
Member
Posts: 140
Joined: Mon Aug 29, 2005 6:10 pm

Post by Bradlze » Wed Feb 14, 2007 12:00 pm

agh no wonder i could see the bastard
was jsut curious about the info for when i want to get off my arse and sort out the wiring in my g200 piazza

cheers

User avatar
wedgenut
Site Admin
Site Admin
Posts: 1636
Joined: Mon Jul 04, 2005 9:39 pm
Location: Hibiscus Coast NZ

Post by wedgenut » Wed Feb 14, 2007 5:43 pm

I don't think there is a job on a G200z i haven't done at least once or twice so the knowledge base is there, no knuckles left of course. I have had one down to the bare bones inside and out and i mean THE BARE BONES . When it went back together it was magic, because everything fitted and functioned correctly, nothing rattled and I only had two shoe boxes full of sundry nuts, bolts washers,clips and a strange looking plastic thing with no obvious reason for existing on this planet or any other for that matter. I also gained about $3.50 in small change, a ticket to a school ball (expired) and a begging letter from one of the previous owners to his mum asking for help with the rent money. The mere fact I found this letter probably means the poor sod got evicted and that is why he had to sell the Piazza. Another chapter in lifes rich tapestry. All in all a screaming success and I can recommend doing it to help top up your supply of the above items that Mr Isuzu obviously fitted somewhere for no apparent reason. LOL
So many cars, so little cash

User avatar
Rodeobob
Site Admin
Site Admin
Posts: 1383
Joined: Mon Jul 11, 2005 1:36 am
Location: Sunshine Nth Melbourne

Post by Rodeobob » Sun Feb 25, 2007 11:57 am

I dont rekon it will work Brad.

Its in the same spot as the Jackaroo so im tipping its the same pump. Wont fit.
I had a look in the Yankee JR manual ive got here.


I might look to make a bracket for the 4Z pump to go on the old girl. Or move the G-series pump over the other side under the dizzy where the Piazza air con is.
Too many Piazzas to little money.

Currently unemployed. Watch this space.

Post Reply