Hills Motorsport

Post all piazza related links here
Post Reply
User avatar
Piazza_man
God member
God member
Posts: 807
Joined: Sun Dec 12, 2010 9:53 pm

Hills Motorsport

Post by Piazza_man »

Holy ricer superman check this out.
http://motivedvd.com/motive/2011/08/30/ ... en-piazza/
It's a piazza, it's a Nissan Sylvia, no it's a Toyota. What ever it is it's fully sick bro.
IZU069
Power Moderator
Power Moderator
Posts: 962
Joined: Wed Sep 14, 2005 2:59 pm
Location: Melbourne (Orstralia)

Post by IZU069 »

It worries me when I see "BIG" injectors.
And Haltechs.

But 710kW ain't too bad. It might come close to beating my old Florian off the line....
IZU069 - ISUZU means a lot to me.
User avatar
Piazza_man
God member
God member
Posts: 807
Joined: Sun Dec 12, 2010 9:53 pm

Post by Piazza_man »

Might be a tighter photo finish than the Melbourne cup, eh?
User avatar
archangel62
Senior Member
Senior Member
Posts: 233
Joined: Sun Aug 14, 2005 7:07 pm
Location: Adelaide, South Australia

Post by archangel62 »

Geeeeeeze... I like the original dash, and there's nothing wrong with Isuzu 4Z engines.. but I spose if you want 710rwkw, that's a pretty good way to get it. Wow. At least they did something nuts, and brought Piazzas into the limelight for a second!
Indigo - '76 TX Gemini sedan, G180W+T project,
Abigail - '81 TE sedan, white, G180W ITB project,
New Hotness - TG Gemini drift car, orange, 4ZE1+T
Tardis - 1986 Piazza 4ZC1-T, black, forged, 136rwkw @13psi
Coupe - TX coupe grip car, "do it later", G180W+twin carbs
Trevor aka Jimmy's Gem - Grandpa-spec TD
BA Falcon - Tow car
IZU069
Power Moderator
Power Moderator
Posts: 962
Joined: Wed Sep 14, 2005 2:59 pm
Location: Melbourne (Orstralia)

Post by IZU069 »

eyecon wrote:Might be a tighter photo finish than the Melbourne cup, eh?
LOL! I did say start.....

I only had the 150HP build (or 230HP with cams and forged pistons).

But that 300Nm @ 2kRPM and in a 1,000kg vehicle (as opposed to the 1,350kg Piazza) is quite effective. (Especially when you consider my entire cost of !$2k - ie, $500 Florian, $750 for 2 G200Ws & 1 5-spd box, $20 exhaust, then the DCOE45s & inlet manifolds.)
And back then I went DCOE because I wasn't prepared to spend the ~$4k for the Haltech which - back then was the choice. Now (ironically) it would be a nice cheap Delco ($100) with a self-tuning extension. (Haltech's 32 maps - what a JOKE!! But as for twin injectors....)

Anyhow, that G200W doubled the Florian's acceleration (compared to a st'd G200W or 4ZC1-t) - and assuming normal street RPM were used (ie, to 3kRPM, maybe 4k).
No Officer - I wasn't racing! I was only at twice idle speed.

True power: when you have to upgrade the clutch!
IZU069 - ISUZU means a lot to me.
User avatar
Piazza_man
God member
God member
Posts: 807
Joined: Sun Dec 12, 2010 9:53 pm

Post by Piazza_man »

Yeah I love the original dash/console too. The guy who owns the car has obviously made the decision to keep the shell only. The rest is re-engineered. Heck even the door trims are different. But I do like that Dana 60 4link setup though. This probably the most radical/extreme Piazza I have ever seen because it's such a departure from the norm. The use of the Piazza name is described very loosely in this case.
User avatar
Piazza_man
God member
God member
Posts: 807
Joined: Sun Dec 12, 2010 9:53 pm

Post by Piazza_man »

Look what's up for sale on gumtree:
1986 Holden Piazza Coupe on Gumtree http://www.gumtree.com.au/s-ad/1114434595
IZU069
Power Moderator
Power Moderator
Posts: 962
Joined: Wed Sep 14, 2005 2:59 pm
Location: Melbourne (Orstralia)

Post by IZU069 »

Hmmm - a Toyota engine, and still being run in - in my experience that often means run out.
I wonder ifthe price may come down - ie, to maybe 10%; especially considering the front LH damage.

Though the name Khoury rings a bell (I think from other Isuzu forums), I hope it's not from the Do not deal with Charbel Khoury Public Warnings as per fairtrading.nsw.gov.au-20140619_public_warning_do_not_deal.page & facebook-FairTradingNSW-567358900041276!
IZU069 - ISUZU means a lot to me.
User avatar
Piazza_man
God member
God member
Posts: 807
Joined: Sun Dec 12, 2010 9:53 pm

Post by Piazza_man »

Engine and ancillaries would have to come out to straighten everything out, but I'd say he'd be very negotiable.
User avatar
Piazza_man
God member
God member
Posts: 807
Joined: Sun Dec 12, 2010 9:53 pm

Post by Piazza_man »

I sent him a message yesterday asking him a couple of things, but haven't had a reply from him yet.
Post Reply