Left lower ball joint

New, Old anything that bolts on and goes
Post Reply
User avatar
vinnie55
Senior Member
Senior Member
Posts: 191
Joined: Wed May 12, 2010 1:31 am
Location: Adelaide

Left lower ball joint

Post by vinnie55 » Mon Oct 31, 2011 6:41 pm

Hey does anyone know a place you can get left ball joints for a piazza?
I rang a place today and they wanted 275 for the original part. naturally I hung up on them.

does anyone know a place that does aftermarket parts for cheaper?

User avatar
wedgenut
Site Admin
Site Admin
Posts: 1636
Joined: Mon Jul 04, 2005 9:39 pm
Location: Hibiscus Coast NZ

Post by wedgenut » Tue Nov 01, 2011 4:11 pm

MEEEEEEEEEEEEEEEEEEEEEEEEEE

I have upper and lower ball joints in stock. PM me if interested
So many cars, so little cash

IZU069
Power Moderator
Power Moderator
Posts: 963
Joined: Wed Sep 14, 2005 2:59 pm
Location: Melbourne (Orstralia)

Post by IZU069 » Wed Nov 02, 2011 6:10 pm

I have the lowers (or whichever ones are NOT the standard Gemini BJs).

So too RodeoBob - we bought "reasonable" stock a while ago in case supply ran short (and in case I ever got a Piazza on the road).
Plus Bob sourced them cheaply from USA - somewhat cheaper than the $265 each that I was originally quoted in Aus (later ~$165).
I think they are about $50 each, though I can't recall the orig costs.


BTW - replace one => replace both. In fact maybe all 4.

I'm replacing my Wasp tie-rods and decided to replace upper & lower ball joints despite lowers being ok, and uppers being replaced relatively recently. Why not - they are only $30 each and I have spares; then all is new and tight...
IZU069 - ISUZU means a lot to me.

Post Reply