Page 1 of 1
wtb, piazza engine for rodeo conversion
Posted: Sun May 10, 2009 1:54 pm
by wildlines
as it states, want a piazza turbo engine for rodeo conversion, in adelaide.
Posted: Mon Jul 06, 2009 4:42 pm
by Rodeobob
Still want it and how much are you offering??
Posted: Thu Jul 09, 2009 2:20 pm
by wildlines
i have kinda steered away from the idea from hearing you say its not really worth it. just need a rodeo engine.
Posted: Thu Jul 09, 2009 6:22 pm
by Rodeobob
As in what Rodeo engine and in what condition???
Cheers, Bob.
Posted: Fri Jul 10, 2009 1:02 pm
by IZU069
IE - Bob can probably help you with Piazza & Rodeo engines etc.
But make him an offer for a 4ZC1-t else say what engine you want ....
Posted: Sat Jul 11, 2009 11:31 am
by wildlines
4ze1. in good nick. or anything else that you can suggest???
Posted: Sat Jul 11, 2009 4:36 pm
by Rodeobob
Dont have an E1, i did have but i sold it.
Theres a loack of info on your part.
What rodeo are you putting it in???
I have a D1 here that ive got to put back together the black has been machined.
New rings and bearings.
If you wanted to make an offer on that.
Bob.
Posted: Mon Jul 13, 2009 10:42 pm
by wildlines
its a 93 rodeo. alloy tray single cab. efi....
Posted: Mon Jul 13, 2009 10:54 pm
by IZU069
So it's a 4ZE1 or V6.
And you wanted a Piazza turbo?
Posted: Mon Jul 13, 2009 11:49 pm
by Rodeobob
It would be a 2.6
Ive got one here but it needs a rebuild.
I do have a series I commodore V6 and manual box here.
Complete motor with loom etc as it came out of the car.
$1000
Cheers, Bob.