WTB: Rodeo dizzy, inlet manifold

After a Piazza or just some parts. Here's the place to go.
Post Reply
User avatar
rodavo
APC Member
APC Member
Posts: 92
Joined: Thu Jul 07, 2005 7:28 pm
Location: Sydney

WTB: Rodeo dizzy, inlet manifold

Post by rodavo »

I am after a 2.6L Rodeo electronic dizzy with coil and igniter. Also after Rodeo inlet manifold, complete with injectors, fuel rail etc.

Email me or reply here.

rodavo@tpg.com.au

Thanks

Dave
User avatar
Rodeobob
APC Member
APC Member
Posts: 1243
Joined: Mon Jul 11, 2005 1:36 am
Location: Sunshine Nth Melbourne

Post by Rodeobob »

Dave the Rodeo doesnt have coil and ignighter.

Its an optical degree wheel dizzy on the 2.6L. Its for a spark and fuel computer.

The 2.3L has a dizzy similar to the Piazza but with everything internal so theres no need for the module on the coil.

Bob.
Too many Piazzas to little money.

Currently unemployed. Watch this space.
User avatar
rodavo
APC Member
APC Member
Posts: 92
Joined: Thu Jul 07, 2005 7:28 pm
Location: Sydney

Post by rodavo »

I was told it did, maybe not....

It would have to have a coil wouldnt it?? What provides the high energy spark? Have you got any pics of the ignition setup on a rodeo??

I will be using it on the piazza motor with a custom ecu, and I dont want to run the magnetic pickup as found on the piazza.

Thanks Bob
User avatar
Rodeobob
APC Member
APC Member
Posts: 1243
Joined: Mon Jul 11, 2005 1:36 am
Location: Sunshine Nth Melbourne

Post by Rodeobob »

Go into the tech articles section pics of all the 4Z dizzys are posted up in there.

Bob.
Too many Piazzas to little money.

Currently unemployed. Watch this space.
Post Reply