In the market for a 4ze1 dizzy.
in the market for shagged 4ze1 suit rebuild if anyone has one (i know evil lol)
turbo manifold suit t25 or t3 flange to suit piazza/g series motor.
and anything else you piazza people find is needed
Few parts I will be needing to complete my new piazza...
-
- Member
- Posts: 54
- Joined: Wed Apr 12, 2006 7:49 pm
- Location: Brisbane, Northside
Few parts I will be needing to complete my new piazza...
My car stopped leaking oil, does that mean I'm out?
- GeminiCoupe
- APC Member
- Posts: 627
- Joined: Mon Jul 11, 2005 2:20 pm
- Location: Victoria - The Boosted State
Dont bother looking for a manifold, as most will be to suit the G series Gemini engines [which means different port shape]. Even if its off a 4Z in a Gemini, it still probably wont suit as the Piazza engine mounts get in a way. Either get a custom one made [$500+] or go the route below.
Get your turbo/decide on what turbo you intend on using. Get a flange cut [$50] to suit that turbo. Ie T28, T28 flange. Take it to a welder that can weld cast, and get them to cut the old flange off the standard Piazza manifold, and weld on the T28 flange. Simple as that and should cost you less then 150.
Nick-
Get your turbo/decide on what turbo you intend on using. Get a flange cut [$50] to suit that turbo. Ie T28, T28 flange. Take it to a welder that can weld cast, and get them to cut the old flange off the standard Piazza manifold, and weld on the T28 flange. Simple as that and should cost you less then 150.
Nick-
project - 76 Gemini Coupe G200z EFI Turbo
daily - 02 S15 Nissan 200SX GTspecS Turbo
wet-weather fun toy - TX 75 Gemini Sedan G200z
daily - 02 S15 Nissan 200SX GTspecS Turbo
wet-weather fun toy - TX 75 Gemini Sedan G200z