W series Fuel pumps?

General Bellett, Gemini 75-98, Piazza 81-93, Bellel, Florian, 117 Coupe, Minx, Aska technical discussion.
Post Reply
Posts: 29
Joined: Thu Sep 04, 2008 5:58 pm
Location: Nz

W series Fuel pumps?

Post by CUL8R » Sat Jan 09, 2010 10:02 pm

Just a query for you Piazza owners out there, what sort of fuel pumps do a W series motor have originally? Im guessing they're low pressure going by the "fuel rail" they have? And dont have a regulator at the motor end?

Any suitable replacements you've used that work?
Oil leak? What oil leak? That puddle under the car is just sweat from all that horsepower....

Power Moderator
Power Moderator
Posts: 963
Joined: Wed Sep 14, 2005 2:59 pm
Location: Melbourne (Orstralia)

Post by IZU069 » Thu Jul 08, 2010 3:16 pm

I thought this had been answered...

If you mean low pressure as in carby - no way - they are EFI! (G200W that is.)

The 117 G200W specifies 2.55 kg/cm2 and I'd expect the Piazza G200W to be similar. (The 4ZC1-t Piazza is ~2.0 to 2.5 depending on test condition.)

Ask Poida on HolGem else twincam (when it gets un-suspended LOL), else someone like Germinator on OzFem. Germy knows about the Camira et al fuel pumps (N13, VN, etc) else should know what suits (I think Camira is 3 bar).
IZU069 - ISUZU means a lot to me.

Post Reply