Welcome to IsuzuPiazza.com :: Uniting Isuzu/ Holden Piazza Enthusiasts since 2002

hi all got a small issue,
i changed the bov on the piazza last night and when i went to start the car it ticks over then dies.
it cranks and just starts to show revs and then dies.
i'll get it to idle for like 1/2 second
whats wrong with it? any ideas?

Try disconecting the vacumhose, if this helps then it is puling air inn through the BOV.

Tommy

Yea the BOV needs to be adjusted so it's shut when idling if its an external venting one, or else it sucks air in there bypassing the airflow meter and causes it to lean out then stall.