Just wondering if anyone else has experienced the same, i beleive this is whats causing my windows to keep falling into the doors [both my slides had this problem]. Am i on the right track in beleiving this is my problem?
If anyone has one of these and is willing to sell one let me know [im only after the plastic white bit]
Nick-
Window problems...
- GeminiCoupe
- APC Member
- Posts: 627
- Joined: Mon Jul 11, 2005 2:20 pm
- Location: Victoria - The Boosted State
Window problems...
project - 76 Gemini Coupe G200z EFI Turbo
daily - 02 S15 Nissan 200SX GTspecS Turbo
wet-weather fun toy - TX 75 Gemini Sedan G200z
daily - 02 S15 Nissan 200SX GTspecS Turbo
wet-weather fun toy - TX 75 Gemini Sedan G200z
- GeminiCoupe
- APC Member
- Posts: 627
- Joined: Mon Jul 11, 2005 2:20 pm
- Location: Victoria - The Boosted State
If they are slidin right down it sounds more like a cabkle problem or motor gear perhaps. Even with no plastic at all the window cant move up and down unless the cable moves. i think you are looking at the wrong bit. I have a couple somewhere, one without a motr so if you get stuck i can probably assist.
Ultra High Molecular Weight Polyethylene. white shit they make chopping boards out of. tougher than Nylon, non hygroscopic, and not brittle like hard plastics
Ultra High Molecular Weight Polyethylene. white shit they make chopping boards out of. tougher than Nylon, non hygroscopic, and not brittle like hard plastics
So many cars, so little cash
- GeminiCoupe
- APC Member
- Posts: 627
- Joined: Mon Jul 11, 2005 2:20 pm
- Location: Victoria - The Boosted State
Ive got two motors and two cable sets at home. The cable set on the original one is for want of a better word, FUCKED. The set currently inside is good, both motors are operating flawlessly. Its got me stumped bigtime. I do remember one thing though, running along the cable [and i cbf pulling the doortrim off right now]. Like a small u bolt running on the cable. Just floating, not attached to anything. Could it be that?
Nick-
Nick-
project - 76 Gemini Coupe G200z EFI Turbo
daily - 02 S15 Nissan 200SX GTspecS Turbo
wet-weather fun toy - TX 75 Gemini Sedan G200z
daily - 02 S15 Nissan 200SX GTspecS Turbo
wet-weather fun toy - TX 75 Gemini Sedan G200z
-
- Member
- Posts: 54
- Joined: Wed Apr 12, 2006 7:49 pm
- Location: Brisbane, Northside
mmm, dude
see the bit in the centre of the rail that moves up and down, where that lil knob thing hooks into, that'll be your problem, mine came out and the window slid straigh down, make sure that bit goes in properly or your up sht creek..
i have the whole assembly out of mine with a broken cable thingy, can send to you if you pay postage.
see the bit in the centre of the rail that moves up and down, where that lil knob thing hooks into, that'll be your problem, mine came out and the window slid straigh down, make sure that bit goes in properly or your up sht creek..
i have the whole assembly out of mine with a broken cable thingy, can send to you if you pay postage.
My car stopped leaking oil, does that mean I'm out?
- GeminiCoupe
- APC Member
- Posts: 627
- Joined: Mon Jul 11, 2005 2:20 pm
- Location: Victoria - The Boosted State
- GeminiCoupe
- APC Member
- Posts: 627
- Joined: Mon Jul 11, 2005 2:20 pm
- Location: Victoria - The Boosted State
-
- Member
- Posts: 54
- Joined: Wed Apr 12, 2006 7:49 pm
- Location: Brisbane, Northside
yes, that part is what came loose/unhooked on mine and caused the window to fall to the bottom. could just well be your problem..
from analyzing the window slider mech those side clips look to only be stabalisers, mine have ALOT of play in them and the window works fine.
from analyzing the window slider mech those side clips look to only be stabalisers, mine have ALOT of play in them and the window works fine.
My car stopped leaking oil, does that mean I'm out?