If you went to the latter Piazza diff its brakes should bolt straight onto the Jackaroo housing.andrew wrote:Question for Tommy, can you please give me a contact for the crown wheel and pinion, I would like to look into that option further.
The reason we chose Piazza components was at the front they bolt straight on, have the same stud pattern, and vented rotors, at the rear we get disc brakes with no great modification, and to set the rear up the two Piazza links bolted right into the Chevette link boxes, which held the axle square while we fabricated the 4-link.
Could go to all sorts of other diffs, but then we face the stud pattern, disc brake etc issues and this way it is at least from the same 'family'.
Then all you have to worry about is the Piazza axles being a little to long.
Bob.
