IDA manifold?

Post Reply
Tommy
Junior Member
Junior Member
Posts: 46
Joined: Thu Jul 07, 2005 6:13 am
Location: Norway

IDA manifold?

Post by Tommy »

Is this what I think it is? Yahoo action Japan

And here is the one I needed. Sold the DCOE TB's long time ago tho.

Tommy
Last edited by Tommy on Thu May 25, 2006 7:18 pm, edited 1 time in total.
User avatar
GeminiCoupe
APC Member
APC Member
Posts: 627
Joined: Mon Jul 11, 2005 2:20 pm
Location: Victoria - The Boosted State

Post by GeminiCoupe »

Sure is. Its to suit a G series SOHC engine though, it will bolt upto a 4Z however port shape is different.

Nick-
project - 76 Gemini Coupe G200z EFI Turbo
daily - 02 S15 Nissan 200SX GTspecS Turbo
wet-weather fun toy - TX 75 Gemini Sedan G200z
User avatar
Bugle
A total post whore
Posts: 953
Joined: Sun Jul 17, 2005 11:41 pm
Location: Sydney

Post by Bugle »

Nah the inlet ports are the same shape they but they do vary in diameter through all the G and 4Z engines..

I think they're pretty easy to find in Australia for Geminis but spose it doesnt matter now since you sold the TB's
User avatar
dbraiki
Member
Member
Posts: 96
Joined: Sun Oct 16, 2005 3:49 pm
Location: Kew Victoria

Post by dbraiki »

Gotta say guys, being a lover of all things Engrish, this quote on that site was beautiful:

"... there are splendid dirt and a splendid crack. The things of a picture are all."

I like splendid dirt and splendid crack.
User avatar
Bradlze
Member
Member
Posts: 118
Joined: Mon Aug 29, 2005 6:10 pm

Post by Bradlze »

GeminiCoupe wrote:Sure is. Its to suit a G series SOHC engine though, it will bolt upto a 4Z however port shape is different.

Nick-
not really nick the brake booster at the back of the manifold clashes with the dizzy :( been there tried that for my other carby 4zc1 had to put the 38dgms back on cos the twin didnt fit :(
Post Reply