Contact About Us Links
FAQ - Search - Members - Groups - Register - Private Messages - Log in

N/A Piazza workshop manual? & Fuel question.

 
Post new topic   Reply to topic    Welcome to IsuzuPiazza.com :: Uniting Isuzu/ Holden Piazza Enthusiasts since 2002 Forum Index -> General Tech
View previous topic :: View next topic  
Author Message
CRUMPN
Learner
Learner


Joined: 15 Jan 2017
Posts: 4
Location: Dunedin, New Zealand

PostPosted: Tue Jan 17, 2017 7:57 am    Post subject: N/A Piazza workshop manual? & Fuel question. Reply with quote

Hello all.

I've finally found another Piazza worth buying, and have done just that.
Its an 82 Twin Cam.

It came minus a fuel pump and with a leak from the fuel tank plug so am in the process of rectifying that.

Does anyone know how i would get my hands on a workshop type manual for these?

Other question is regarding fuel system.... What fuel delivery pressure does a N/A Piazza require? So i can figure out what spec fuel pump to put on it.

Cheers
Cory
Back to top
View user's profile Send private message
eyecon
God member
God member


Joined: 12 Dec 2010
Posts: 777
Location: Australia's Capital

PostPosted: Wed Jan 18, 2017 7:42 am    Post subject: Reply with quote

Hi Cory, welcome to the forum. I'm not an officiando in the twin cam but I found something from a Japanese selling site that I use all the time, which might be of use to you in terms of sourcing new genuine parts, but I'll dig deeper to see if it's the same as the turbo version. I suspect it won't be.

Piazza fuel pump JR130 genuine part number 8-94471-314-0

http://buyee.jp/item/yahoo/auction/c564541630?lang=en&rc=yaucc_sp

Or this used one:
http://page21.auctions.yahoo.co.jp/jp/auction/j325358916


Last edited by eyecon on Wed Jan 18, 2017 2:58 pm; edited 1 time in total
Back to top
View user's profile Send private message Send e-mail
Ghost
Member
Member


Joined: 04 May 2007
Posts: 137
Location: Auckland, NZ

PostPosted: Wed Jan 18, 2017 2:32 pm    Post subject: Reply with quote

Im surprised how much that car went for considering it was basically in the middle of nowhere (I was going to bid $700 and pay $850 for shipping..)
How bad was the rust IRL, the photos were not too clear..

No idea on the specs however I would imagine it would be about the same as a SOHC engine, I don't think the injection system is TOO different?
_________________
1986 Piazza - 1984 Piazza
1986 Heron MJ1
www.mvpc.co.nz www.ihwedding.co.nz
Back to top
View user's profile Send private message Visit poster's website MSN Messenger
CRUMPN
Learner
Learner


Joined: 15 Jan 2017
Posts: 4
Location: Dunedin, New Zealand

PostPosted: Thu Jan 19, 2017 4:42 pm    Post subject: Reply with quote

Thanks for those links, I'll look into that Jap site if the one on this Parts car I've just acquired is no good.

Rust is fairly substantial and all over it. Much much more than described in the TradeMe auction which is rather disappointing..... Also wasn't mentioned that the entire engine bay was a massive rats nest and a fair bit of the wiring is chewed through.
Even got to meet the rat whilst loading on the trailer yesterday.

As much as i don't want to wreck a Piazza.... Its beyond putting back on the road unfortunately.
Back to top
View user's profile Send private message
CRUMPN
Learner
Learner


Joined: 15 Jan 2017
Posts: 4
Location: Dunedin, New Zealand

PostPosted: Sat Jan 21, 2017 11:44 am    Post subject: Reply with quote

Fuel pump off the parts car works A-ok so I'm away laughing.

Also think I've been scammed out of NZ$25 from a website called "Best Manuals"
Seemed legitimate but its been almost a week and haven't heard a peep....They happily took my money tho.

Hopefully PayPal can sort it.

I've started a Facebook group if anyone is interested...... This type of Forum seems a bit obsolete currently

https://www.facebook.com/groups/1855008038047927/

Cheers
Cory
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Welcome to IsuzuPiazza.com :: Uniting Isuzu/ Holden Piazza Enthusiasts since 2002 Forum Index -> General Tech All times are GMT + 10 Hours
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum