Anyone know if a LSD diff head will fit into a non LSD piazza diff?

Curious because I know they run different style mounts for the diff as opposed to a open diff.

Chris.

Hey mate, best to try a non turbo piazza , I've got a zz/r diff that i've put into my chevette..

http://www.ozgemini.com/forums/non-tech ... hp?t=33193
From memory I had to get piazza pads for it, (took me a couple of goes)

just a question regarding the voltage regulator and where it supplies the ecu loom.. Basically my g200w came as a complete loom, but was missing the alternator/voltage regulator wiring - which I've now aquired a voltage regulator & for the most part alternator wiring.. I've worked out where to p...

Yes, I've fitted Kadett C springs along with koni shocks into my chevette. (which as mentioned is the same)

Just a query for you Piazza owners out there, what sort of fuel pumps do a W series motor have originally? Im guessing they're low pressure going by the "fuel rail" they have? And dont have a regulator at the motor end?

Any suitable replacements you've used that work?

Going by the phone number, Im going to hazzard a guess you're in NZ, Im just putting a g200w into my chevette, have another g180w, I know where theres a complete g200w & 5spd - but would Ideally need a rebuild I'd imagine..

Can also point you in the direction of one that was on trademe..

Does anyone there have someone they can put me into contact with on the twincam forum?
I've registered, but I never got the activation email, tried emailing again but the activation email never comes through?

Dependant on condition I may have both here in Nz, shall have a look on monday for you..

Kadett C is what you're after, I've just bought some for my chevette!

The What?

Should do, as thats what I put the piazza springs into, TF Gemini wagon... Same dimensions in piazza springs & gemini's - piazza's were a little softer in the particular one I had Also you're talking about lowering it, I chopped 2 coils from the front springs - still fully captive, lowered it so...

Any updates on the forums? as to whats happening, been hanging out for a couple of months (3-4-5 now)

^ I've done it the other way around, and yes they certainly do, I found the piazza springs a little softer than gemini ones, although a tad lower, the springs I had were from a g200z auto piazza..

Cheers,chris

Can confirm its not LSD,
And isnt a HBL, has a 3 link rear end, springs and shocks dont look anything special/out of the ordinary to me - just have 'isuzu' stamped in them (there are some numbers if people are interisted)

Im in Chch, and yes Looking at buying that Piazza on trademe (mate bidding on currently) , friend was intending on putting together and using as club type car, but will be far too much of a mission.. (no loom or ECU along with most of ancillaries unbolted) So will part it out, have already someone w...