Page 1 of 1
other parts that fit the piazza
Posted: Wed Sep 14, 2005 11:11 pm
by Bradlze
http://www.gimmecarparts.com.au/product ... D73A16E2F4
guys this tells you what other parts can be used for the piazza
Posted: Thu Sep 15, 2005 3:37 am
by Rodeobob
Yeah theres a few good bits on there. The echlin cap would be a good thing if its the right one.
The gaskets and stuff i can get from bursons for a better price. Got a VRS for a 2.3L last week. $99 they list in there for $130. Rear main at the bearing/seal joint up the road $26. They list $43
be careful to make sure you are getting the bit for the turbo motor.
Cheers. Bob.
Posted: Thu Sep 15, 2005 1:01 pm
by piazza-crx
Ok, if the Gemini TC front standard shock-absorbers fit the Piazza, do the Sensatrac ones fit too? When you do a lookup on Monroe's website the sensatrac absorbers show up for the gemini but not for the piazza. anyone know?
Posted: Fri Sep 16, 2005 3:37 pm
by WA Piazza
OMG brad you a god damn legend thank you thank you
you gave me the altimate answer to the injector question
I have found the injector number from bosch on that website, but im not sure on the standard HP rating on each injector so if i could find that out that would be awsome. The injector i found is a 56HP injector but im not sure if thats rite. So if someone here could posibble tell me the inpeadince of the injector and the HP of it that would be quite great thank you
Cheers brad atleast i found a couple of injectors that would fit cheers budd
Josh