After a Piazza or just some parts. Here's the place to go.
sochino3
Probationary
Posts: 11 Joined: Wed Nov 03, 2010 8:15 pm
Location: Canberra
Post
by sochino3 » Fri Nov 05, 2010 8:59 am
Is anyone wreaking a piazza that has a injector resistor?
i need one asap.
willing to pay top dollar!! $$$$
Thank you
^_^
IZU069
Power Moderator
Posts: 962 Joined: Wed Sep 14, 2005 2:59 pm
Location: Melbourne (Orstralia)
Post
by IZU069 » Fri Nov 05, 2010 10:29 am
I should have a Piazza resistor block (3x2 spade connector).
I'll check...
What sort of postage are you after (since it's Friday). Courier?
I'd want $30 for the block...
(Melbourne. Sent after funds received.)
IZU069 - ISUZU means a lot to me.
sochino3
Probationary
Posts: 11 Joined: Wed Nov 03, 2010 8:15 pm
Location: Canberra
Post
by sochino3 » Fri Nov 05, 2010 2:29 pm
are u able to send a pic of the plug (front view)
thanks
^_^
IZU069
Power Moderator
Posts: 962 Joined: Wed Sep 14, 2005 2:59 pm
Location: Melbourne (Orstralia)
Post
by IZU069 » Fri Nov 05, 2010 6:31 pm
Should be the same as Wedgy's pic - ie, 3x2 spade
ie, pins like:
- - -
- - -
(male of course)
(Same as a Gemini voltage regulator.)
IZU069 - ISUZU means a lot to me.
wedgenut
Site Admin
Posts: 1520 Joined: Mon Jul 04, 2005 9:39 pm
Location: Hibiscus Coast NZ
Post
by wedgenut » Fri Nov 05, 2010 8:49 pm
they are actually only 5 pin, 1 power and 4 to injectors
like this B = blank position
-- -- --
-- B --
So many cars, so little cash
sochino3
Probationary
Posts: 11 Joined: Wed Nov 03, 2010 8:15 pm
Location: Canberra
Post
by sochino3 » Sat Nov 06, 2010 8:34 am
ok do i just transfer money?
i need bank details
please send to:
The Impound
21 Brookes street Mitchell ACT
2911
thanks you so much
^_^
sochino3
Probationary
Posts: 11 Joined: Wed Nov 03, 2010 8:15 pm
Location: Canberra
Post
by sochino3 » Sat Nov 06, 2010 3:24 pm
By any chance would have a dizzy cap too?
^_^
wedgenut
Site Admin
Posts: 1520 Joined: Mon Jul 04, 2005 9:39 pm
Location: Hibiscus Coast NZ
Post
by wedgenut » Sat Nov 06, 2010 9:33 pm
Is your cap held on with spring clips or two screws. I have plenty of new ones in stock of the screw on style, as per the picture but none of the spring clip type.
So many cars, so little cash
sochino3
Probationary
Posts: 11 Joined: Wed Nov 03, 2010 8:15 pm
Location: Canberra
Post
by sochino3 » Sun Nov 07, 2010 7:54 am
ill check. if i were to get both items would they be here next week??
or does izu069 have a dizzy cap too?
^_^
IZU069
Power Moderator
Posts: 962 Joined: Wed Sep 14, 2005 2:59 pm
Location: Melbourne (Orstralia)
Post
by IZU069 » Sun Nov 07, 2010 9:11 am
I should have a dizzy cap, but not new.
If you get a new cap, get a new rotor as well.
PM me with postage type if interested.
IZU069 - ISUZU means a lot to me.
IZU069
Power Moderator
Posts: 962 Joined: Wed Sep 14, 2005 2:59 pm
Location: Melbourne (Orstralia)
Post
by IZU069 » Wed Dec 01, 2010 12:45 pm
I presume this sorted itself out...?
IZU069 - ISUZU means a lot to me.
wedgenut
Site Admin
Posts: 1520 Joined: Mon Jul 04, 2005 9:39 pm
Location: Hibiscus Coast NZ
Post
by wedgenut » Tue Dec 07, 2010 4:30 pm
Think so, I sent over a dizzy cap and dropping resistor
So many cars, so little cash
Chris
IPTOC President
Posts: 964 Joined: Thu Jun 30, 2005 9:37 pm
Location: Melbourne
Post
by Chris » Wed Dec 15, 2010 10:08 am
The Impound ?
LESS SHOW, MORE GO!!
2009 | 1986 White Piazza 2.2L, Man, STi Turbo (SOLD)
2006 | 1986 Black Piazza Turbo Manual (SOLD)
2005 | 1986 White Piazza Turbo Auto (Pain in the ass)
2004 | 1986 White Piazza Manual Stock
2004 | 1986 Red Piazza Manual TO3, Haltech
2001 | 1986 Silver Piazza Manual Turbo
IZU069
Power Moderator
Posts: 962 Joined: Wed Sep 14, 2005 2:59 pm
Location: Melbourne (Orstralia)
Post
by IZU069 » Wed Dec 15, 2010 10:59 am
The resistors might be - they are as common as....
IZU069 - ISUZU means a lot to me.