Just wondering..
What do you guys have to say about those engines ?
Is the g200 a better engine than 4zc1 ??
I think the dohc is best looking!
What engine do you guys prefer ?? 4ZC1 or G200
What engine do you guys prefer ?? 4ZC1 or G200
1989 Isuzu Piazza JR120 Lotus Turbo Red 92000km
1989 Isuzu Piazza JR120 Lotus Turbo White 183000km
1987 Isuzu Piazza JR120 Pre-Lotus Turbo Red 131000km
1984 Isuzu Piazza JR130 N/A Two-tone 145000km
1984 Isuzu Piazza JR130 N/A Black 92000km
1989 Isuzu Gemini JT190 Red 173000km
1989 Isuzu Piazza JR120 Lotus Turbo White 183000km
1987 Isuzu Piazza JR120 Pre-Lotus Turbo Red 131000km
1984 Isuzu Piazza JR130 N/A Two-tone 145000km
1984 Isuzu Piazza JR130 N/A Black 92000km
1989 Isuzu Gemini JT190 Red 173000km
Need specifics - G200Z or G200W?
I prefer G200W (DOHC) for its simple torque improvement.
Standard the G200W & 4ZC1-t have similar torque & power.
But lengthen the first 2:1 section of G200W exhaust (from standard manifold) for about 26" and you double the torque at half the RPM (assuming EFI or carby capable). That's double the acceleration!
I do not know of similar conversion for the 4Zs.
I prefer G200W (DOHC) for its simple torque improvement.
Standard the G200W & 4ZC1-t have similar torque & power.
But lengthen the first 2:1 section of G200W exhaust (from standard manifold) for about 26" and you double the torque at half the RPM (assuming EFI or carby capable). That's double the acceleration!
I do not know of similar conversion for the 4Zs.
IZU069 - ISUZU means a lot to me.