Page 1 of 2
Standard Injector PN
Posted: Wed Sep 14, 2005 9:34 pm
by WA Piazza
Hey guys
hahaha after a very long time online i have finally found the part number to the standard Injectors so for all youse that require the number just look here.
Its C1000-50324
I found it after looking at past posts by Chris, Cheers man your a complete life saver lol.
The post he wrote was about websites that have various parts (you may remember that chris lol) well i looked on one of them then i looked in the isuzu cars then piazza came up
so i was like awsome kept going even found fuel injection then looked at pik and there they were omg
the cost of them ea are $100USD
But if you go to a injector dealer with the part number you'll probably get them for about $150ea. So i shall go pik up 4 new ones tomorow then put them in and finally get this baby on the road hahaha.
This is the website if you want have a look at any other parts cos theres heaps of parts there as well as part numbers.
This shall fix every ones problems with engine parts.
Its
http://www.autopartswarehouse.com
Once again cheers chris!
Josh
Posted: Fri Sep 16, 2005 3:09 pm
by WA Piazza
hey guys
sorry bout that injector number its not a bosch number so lol do try goin to ask some one for an injector cos its rong lol
once again im sorry and ill ring around to try and find the proper number
cheers
josh
Posted: Fri Sep 16, 2005 4:45 pm
by Bugle
They're JECS injectors which are probably relabelled Nippondenso ones..
Anyway the part numbers written on them are:
On the side of the green part with the electrical socket - A46-00
Then on the top of the same part - 5140 6210N
Posted: Fri Sep 16, 2005 4:58 pm
by WA Piazza
Bugle thanks man
your gratatude is well worth it
Atleast now i can go get them and put them in so i can finally take the piazza over the pits.
Oh one thing where would i be able to buy them from?
cheers
Josh
Posted: Fri Sep 16, 2005 5:46 pm
by Bugle
Not sure where you'd be able to get them.
I looked on google with the part numbers and got a partial match from E15ET (Nissan Pulsar ET/Exa Turbo) injectors.
One this guy has is A46-00 5140 2Y04B.
In this thread on PF
http://pforums.company-hosting.com/foru ... t=67175525
Could be the same with the last 5 being a batch number.
The flow rate is about the same as what i've heard Piazza ones being quoted at so those injectors would be fine. Also they're similar flow rate to VL turbo
ones according to the thread.
Rare spares have VL turbo ones for $200 each!
Posted: Fri Sep 16, 2005 5:54 pm
by Bugle
ok found some more evidence of the last 5 characters being a batch number on JECS injectors. Different injector sets, same engine model (FJ20ET), same first 4 numbers then different after that.
http://forum.910bluebird.com/index.php?showtopic=658
So that would make E15ET injectors the same part and they would be easier to find.
Posted: Fri Sep 16, 2005 5:59 pm
by WA Piazza
cheers man
i rang coventries and i gave them a part number and they said it was from an EXA so yeh cheers for all the information i have now finally found the right one. Now i can put it in and take it over the pits.
Cheers for your help bugle
Josh
Posted: Fri Sep 16, 2005 6:03 pm
by Bugle
No worries
I'll put a post in the Replacement parts section.
How much do they cost new?
Posted: Fri Sep 16, 2005 6:06 pm
by WA Piazza
they cost $157.20 a peice and thats from coventries. Dont no about the other auto places.
which isnt to bad
but yeh cheers for that
Josh
Posted: Fri Sep 16, 2005 6:25 pm
by WA Piazza
oh bugle
that pricing is for a bosch EXA injector
and that part number is 0280150775
cheers
Josh
Posted: Fri Sep 16, 2005 6:30 pm
by Bugle
Thanks, updated that thread.
Posted: Fri Sep 16, 2005 6:44 pm
by WA Piazza
yeh
no worries
nething for this awsome forum
its better then the PPCC forum lol
cheers
Josh
Posted: Sat Sep 17, 2005 1:23 am
by Rodeobob
Josh why get new ones???
Why not just get one used unit then a full set of bigger ones a bit later.
I remember reading that the VL turbo injectors flow slightly more than the EXA/pulsar E15ET ones, but i think it was at higher fuel pressure.
Either way you should be able to get one of the above from a wreckers. I saw an exa at pick a part the other day over here. Have a look around.
Cheers. Bob
Posted: Sun Sep 18, 2005 4:13 pm
by shorty
while we are on the topic of injectors has anyone upgraded there injectors to bigger ones? if so what are they and were they a bolt in job or was work needed to get them in
Posted: Sun Sep 18, 2005 6:00 pm
by WA Piazza
shorty while ur on that subject dont forget what ecu have you used with the new injectors and how much did it cost you to get and install
cheers
Josh