Page 1 of 1
piazza and shuttle 4ZC1 Heads
Posted: Thu Sep 15, 2005 1:49 pm
by Bradlze
i know that they are interchangable but does anybody know if there are any differences in the 2?
Posted: Fri Sep 16, 2005 2:42 am
by Rodeobob
Search is your friend.
Im sure there was a post in Oz gemini about this. Go look it up. It covered 2L and 2.3L heads.
It was asking about the whole motor what you are asking about the head.
Cheers. Bob.
Posted: Fri Sep 16, 2005 10:50 am
by Bradlze
yeah i searched this site and came up with nothing useful but yeah i guess i try ozgem and post up the results
Posted: Sat Sep 17, 2005 1:17 am
by Rodeobob
The shuttle 2L and rodeo/jackaroo 2.3L head is the same as the Piazza one. The only difference is in the Rodeo head (not sure on the Jackaroo) there is a hole in the head under the manifold for a push rod up to the cam to drive the mechanical fuel pump.
I would imagine that the Turbo cam would be different.
The cams for all the other 4Z n/a 1.8-2.6L motors are the same i was told. I was also told its the same grind as the G-series motors.
Cheers. Bob.