O2 sensor

Post Reply
cyberjo
Probationary
Probationary
Posts: 29
Joined: Sat Nov 19, 2005 11:04 pm

O2 sensor

Post by cyberjo »

hi can any one tell me can I get a O2 sensor or what if any will fit will the shuttle one fit
User avatar
GeminiCoupe
APC Member
APC Member
Posts: 627
Joined: Mon Jul 11, 2005 2:20 pm
Location: Victoria - The Boosted State

Post by GeminiCoupe »

Shuttle shouldnt have an 02 sensor as its Carby.

O2 sensors are 90% of the time generic, so any off-the-shelf replacement with the same thread should work. Take the sensor out and take it to Repco or Bursons and they should be able to help you. From memory its a 2 wire non-heated type.

Nick-
project - 76 Gemini Coupe G200z EFI Turbo
daily - 02 S15 Nissan 200SX GTspecS Turbo
wet-weather fun toy - TX 75 Gemini Sedan G200z
User avatar
Bugle
A total post whore
Posts: 953
Joined: Sun Jul 17, 2005 11:41 pm
Location: Sydney

Post by Bugle »

The plugs probably wouldn't generic though. I think the threads are the same on any Jap car. My original o2 sensor screws into an R32 Skyline dump pipe.

Dunno why but RB Geminis made from 1986 onwards (unleaded) have an o2 sensor even though they're carby. It's the same plug as a Piazza one. If 1986 Shuttles have o2 sensors then they're probably going to be the same too..

It's easy to swap a plug anyway if you have to do that.
User avatar
Rodeobob
APC Member
APC Member
Posts: 1243
Joined: Mon Jul 11, 2005 1:36 am
Location: Sunshine Nth Melbourne

Post by Rodeobob »

Nup not in a Shuttle.

I rekon theres one up on eBay that references as a replacment part for a Rodeo, that could work in a Piazza.


Bob.
Too many Piazzas to little money.

Currently unemployed. Watch this space.
Post Reply