O2 sensor
- GeminiCoupe
- APC Member
- Posts: 627
- Joined: Mon Jul 11, 2005 2:20 pm
- Location: Victoria - The Boosted State
Shuttle shouldnt have an 02 sensor as its Carby.
O2 sensors are 90% of the time generic, so any off-the-shelf replacement with the same thread should work. Take the sensor out and take it to Repco or Bursons and they should be able to help you. From memory its a 2 wire non-heated type.
Nick-
O2 sensors are 90% of the time generic, so any off-the-shelf replacement with the same thread should work. Take the sensor out and take it to Repco or Bursons and they should be able to help you. From memory its a 2 wire non-heated type.
Nick-
project - 76 Gemini Coupe G200z EFI Turbo
daily - 02 S15 Nissan 200SX GTspecS Turbo
wet-weather fun toy - TX 75 Gemini Sedan G200z
daily - 02 S15 Nissan 200SX GTspecS Turbo
wet-weather fun toy - TX 75 Gemini Sedan G200z
The plugs probably wouldn't generic though. I think the threads are the same on any Jap car. My original o2 sensor screws into an R32 Skyline dump pipe.
Dunno why but RB Geminis made from 1986 onwards (unleaded) have an o2 sensor even though they're carby. It's the same plug as a Piazza one. If 1986 Shuttles have o2 sensors then they're probably going to be the same too..
It's easy to swap a plug anyway if you have to do that.
Dunno why but RB Geminis made from 1986 onwards (unleaded) have an o2 sensor even though they're carby. It's the same plug as a Piazza one. If 1986 Shuttles have o2 sensors then they're probably going to be the same too..
It's easy to swap a plug anyway if you have to do that.