Gemini front lower control arm bush same as JR?

Impulsive Yank · Post by **Impulsive Yank** » Tue Aug 22, 2006 5:58 pm

SuperPro poly:

is that the same bush to fit the lower arm/k-member of the Piazza?

Bradlze · Post by **Bradlze** » Wed Aug 23, 2006 11:38 am

supposedly yeah and from my personel experience it looks to be the same

Bugle · Post by **Bugle** » Wed Aug 23, 2006 11:43 pm

Yeah these are Gemini ones but I had to machine down the shell so that it would fit. Just couldn't press it in otherwise. Only had to take off about 0.5mm I think. I suppose they figure the Gemini arm is going to have some give in the holes being thinner steel. Also Gemini arm holes would've been spread out once already from the original bushes installation so I suppose they're compensating for that too. The standard bushes on Gemini and JR arms appear to be the same.
Mine aren't Super Pro ones though so those could be fine.

Gemini arm with some JR bushes sitting next to it (stuffed the rubber on the small end getting them out of the arm)

Impulsive Yank · Post by **Impulsive Yank** » Thu Aug 24, 2006 5:06 am

great, thanks for the visuals.

what brand are those yellow ones?

Bugle · Post by **Bugle** » Fri Aug 25, 2006 12:49 am

They're Selbys. Don't think they're around anymore just got them as old stock cheap off Ebay.