Welcome to IsuzuPiazza.com :: Uniting Isuzu/ Holden Piazza Enthusiasts since 2002

As some may know, I required a new bush in order to get RWC (Road Worthy Certificate).

Couldnt find anything apart from sourcing it overseas.

So I've rung padders suspension in Morrabin (Vic) and they said to bring it down to have a look at it. After a few days, they have replaced both side bushes and guess which once fit? 1990 Honda Prelude. Lol

Set Bushes cost $110 AUD

and I payed $445 for parts, labour and wheel allignment.

However, the bush insides fit perfect though you will need to cut them down a tiny bit if you thinking of doing a D.I.Y.

Hope this information helps.


Regards,

Chris


Pedders Suspension
Ask for: Nick Papasergio
39 Wren Road Moorabin, Vic Australia
Tel. 03 9555 5044 Email: morrabbin@pedders.com.au
Http://www.pedders.com.au

Superpro bushes in Australia still make the piazza rack bushes, they are onlky missing the hole for the breather tube to go through. kit retails for about $50, will post part num asap

Great info mate. Please post all the details of the place so other members know where to go to in the future.

Sticky Post!

Hey this is sweet! Just going over my front end atm and noticed that the bush on the Left (looking into bay) has folded into itself a bit. I understand this is a common problem.

Looking forward to getting the part #

You could be waiting a long time, he seems to have vanished...
My car is just about due for then too, my small project is getting quite big...

If we are, in this post, is about dustcoat, here is a universal rubber
Mapco 29997

Rack mount bushes are Suiperpro part number SPF1655K. I have posted this info several times before. But they will not fit HBL rack as they have a different RH side bush. In that case source OEM from IPTOC