Gemini front lower control arm bush same as JR?

Post Reply
User avatar
Impulsive Yank
Member
Member
Posts: 70
Joined: Mon Jan 23, 2006 7:36 am
Location: USA

Gemini front lower control arm bush same as JR?

Post by Impulsive Yank »

SuperPro poly:
Image

is that the same bush to fit the lower arm/k-member of the Piazza?
88 Impulse Turbo
will do good deeds for beer :drinkers:
User avatar
Bradlze
Member
Member
Posts: 118
Joined: Mon Aug 29, 2005 6:10 pm

Post by Bradlze »

supposedly yeah and from my personel experience it looks to be the same
User avatar
Bugle
A total post whore
Posts: 953
Joined: Sun Jul 17, 2005 11:41 pm
Location: Sydney

Post by Bugle »

Yeah these are Gemini ones but I had to machine down the shell so that it would fit. Just couldn't press it in otherwise. Only had to take off about 0.5mm I think. I suppose they figure the Gemini arm is going to have some give in the holes being thinner steel. Also Gemini arm holes would've been spread out once already from the original bushes installation so I suppose they're compensating for that too. The standard bushes on Gemini and JR arms appear to be the same.
Mine aren't Super Pro ones though so those could be fine.

Image

Gemini arm with some JR bushes sitting next to it (stuffed the rubber on the small end getting them out of the arm)
Image
User avatar
Impulsive Yank
Member
Member
Posts: 70
Joined: Mon Jan 23, 2006 7:36 am
Location: USA

Post by Impulsive Yank »

great, thanks for the visuals.

what brand are those yellow ones?
88 Impulse Turbo
will do good deeds for beer :drinkers:
User avatar
Bugle
A total post whore
Posts: 953
Joined: Sun Jul 17, 2005 11:41 pm
Location: Sydney

Post by Bugle »

They're Selbys. Don't think they're around anymore just got them as old stock cheap off Ebay.
Post Reply